The purpose of this study is to investigate a small centrifugal cooling fan applied on notebook computers, which is consisted of a forward-curved impeller and a centrifugal housing. First of all, a basic rotor impeller is designed with the cascade theory. To manufacture the mock-up for experimental verification, the design fan will be expressed in the CAD/CAM format for the CNC machine. All exp...

wind power has been widely considered in recent years as an available and a clean renewable energy source. the cost of wind energy production is currently the main issue, and increasing the size of wind turbines can reduce wind energy production costs. hence, megawatt wind turbines are being rapidly developed in recent years. in this paper, an aerodynamic analysis of the nrel 5mw turbine is car...

Improving the efficiency of compressors has been one of the most important goals of researchers over the years. In this paper, three different methods are presented for parameterization and blade optimization of axial flow compressor. All methods consist of flow analysis tool, optimization algorithms, and parametric geometry generation tool, that are different in each approach. Objective functi...

Wind power has been widely considered in recent years as an available and a clean renewable energy source. The cost of wind energy production is currently the main issue, and increasing the size of wind turbines can reduce wind energy production costs. Hence, megawatt wind turbines are being rapidly developed in recent years. In this paper, an aerodynamic analysis of the NREL 5MW turbine is...

By making use of a suite of programs for designing profile geometry, cutter geometry and predicting the thermodynamic performance of a twin screw compressor, this paper investigates techniques of obtaining an optimised rotor cutter blade design. The techniques for using different geometric schemes for setting clearances are explained, and the techniques for optimising main manufacturing paramet...

Accuracy is the key issue in the precision forging. Geometric and dimension errors are the two significant defects found in most of near net or net shape manufacturing process. It becomes more critical for complex part such as an AUV propeller blade. In this study, geometric error was quantified by comparing the blade profile obtained from nominal geometry of the blade and the profile construct...

Wind power has been widely considered in recent years as an available and a clean renewable energy source. The cost of wind energy production is currently the main issue, and increasing the size of wind turbines can reduce wind energy production costs. Hence, megawatt wind turbines are being rapidly developed in recent years. In this paper, an aerodynamic analysis of the NREL 5MW turbine is...

The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...

The technique consists of forming a surface pitot-tube by placing a small segment of razor blade on the surface with its tapered cutting edge above a static-pressure hole. The effects of limited changes in the razor-blade geometry on the measured pressure have been determined in a two-dimensional turbulent boundary layer and a calibration curve for a particular standardised geometry deduced. Th...

Constantly rising operating pressure and temperature in turbine drivers push the material capabilities of turbine blades to the limit. The recent development of heterogeneous objects by layered manufacturing offers new potentials for the turbine blades. In heterogeneous turbine blades, multiple materials can be synthesized to provide better properties than any single material. A critical task o...